In a previous post, we addressed the dangers that can come from dryer fires and why it’s important to take preventative measures and keep your home and family safe. It’s equally important to have surge protection in your home to protect your home from electrical hazards. Society has evolved over the past several years and there are more technological pieces per household than there have ever been before. With this comes a great chance of surges happening because each electronic often comes with a circuit board.
So what exactly is a power surge? It’s an intense short burst that’s generated within the home. These bursts are caused by motors within electronics, and it’s rare for them to take down the whole electrical system. Over time, however, the mini surges add up and will begin to take a toll on the lifespan and performance of your appliances. We’ve shared a few things that you’ll want to know about surge protectors before getting one yourself:
- If you have a device or appliance that isn’t dedicated to a circuit but is connected with other devices, there’s a potential problem. If that device sends a surge through that circuit, the other outlets from the shared devices could also be susceptible to a surge. This is one reason to get surge protection in your whole home.
- Instead of getting a surge protector at the electrical panel, it’s a good idea to consider getting a surge protector at the point of use to help protect electronics that are especially sensitive.
- If you have a whole home entertainment system or home theater, power conditioners with surge suppression capability are the best route. They provide power through a filtered system to your video and audio equipment.
- You don’t want to buy just any surge protector – make sure you’re getting the right one for your home. Many homes have 120V service. If this is the same for your home, then an 80kA rated surge protector should be adequate. The reason why is because it’s unlikely for a home to surge over 10kA, so many homes will be covered and protected with the 80kA rated surge protector. Of course it’s important for you to verify which your home is and what’s the best protector for your appliances and systems.
- You’ll also want to pay attention to the nominal discharge rating for your surge protectors. Ratings should be 3, 5 or 10KA. This rating is important because it indicates the ability to weather through high energy waves respectively over time and still operate optimally.
- The Voltage Protection Rating should also be considered when purchasing a surge protector. This represents that amount of voltage that the surge protector allows to pass through it. For this rating, you’ll want to have lower numbers such as 500V to 600V.
- Surge protectors should be replaced annually to make sure you’re your electronics are protected.
When using any form of electricity, it’s always important to make sure that your electrical panel is operating efficiently and safely. Central Carolina Air Conditioning, Plumbing & Electrical can perform a thorough scan throughout your home, looking for any hot spots in your electrical system. We will also test the ground fault outlets to make sure that they are functioning properly.
Give us a call today Call to schedule your appointment today at 800-461-3010.